We have answers for your frequently asked questions.

No matter what your HVAC questions are, the techs at All Seasons Comfort Systems Inc in Reeds Spring have answers. Whether you have questions about picking new HVAC equipment to best practices on care and maintenance, we are here to help. Our online FAQs answers offer a fast response for your convenience, but if you want to know more on any topic, don’t hesitate to give us a call at 417-739-4606.

Why is regular maintenance important?

Just like you need to take your car in to the shop for regular tune-ups, such as oil changes or looking at potential issues, your home comfort system should receive the same kind of attention. Scheduled maintenance by a professional technician provides a variety of benefits to your HVAC equipment, which can help your systems perform efficiently and prevent costly breakdowns.

What is two-stage heating?

Two-stage heating permits the furnace to heat at two levels of output: high for cold winter days and low for mild ones. Approximately 80 percent of the time, your home’s heating requirements can be met when the furnace is left on the low setting, enabling your two-stage unit to operate for longer periods of time. Two-stage units also offer more even heat distribution, fewer temperature swings, quiet operation, better air filtration and energy efficiency.

How does Precise Comfort™ technology work?

Lennox’s Precise Comfort™ technology is an operating and control system that allows a furnace to adjust heat and airflow by very small amounts, as low as a 1 percent change. The system is automatic and works similar to cruise control, making adjustments gradually to meet your comfort demands with energy efficiency.

How will my new furnace work differently from my old one?

Depending on how old your previous furnace was, you could experience a host of differences. Furnaces today are created to give more even and efficient heating than ever before. Modern furnaces also better regulate temperature and air flow, moving more air over the heat exchanger than older furnaces.

Additionally, new furnaces are created to work with other high-efficiency HVAC products, such as air conditioners. The air conditioner blowers offer your heating system an extra bump so it can deliver cool air around your home efficiently. Special features like variable speed motors will also help reduce noise associated with operating your equipment and easily meet your family’s airflow needs.

How can I reduce my energy costs?

Lennox carries a number of HVAC products with high efficiency ratings, which can help reduce the amount of energy they require to operate40]. Aside from picking products that have received Energy Star® certification or achieved high SEER ratings for air conditioners or AFUE ratings for furnaces, you can think about the following:

  • Maintenance – making certain that your system receives regular maintenance by a trained technician can keep your system operating at its best performance.
  • Zoning – zoning systems enable you to only heat or cool only targeted areas of your home, so you won’t have to pay to heat or cool spaces that you don’t usually use.
  • Programmable thermostats – using a programmable thermostat allows you to set the temperature in your home based on your schedule. They can be programed to provide the comfort you desire when you’re home, and increase or decrease the temperature while you’re away, helping you save on heating and cooling costs.

Why should I buy from Lennox?

There are a number of reasons to go with Lennox, but the top three are:

  • You know and trust the name – Lennox is known around the world for its quality home comfort products.
  • Innovation and high quality – Lennox is an industry leader, offering a huge line of innovative solutions for your home comfort needs.
  • Commitment to excellence – We are devoted to offering customers not only quality products, but also quality service. You can trust Lennox dealers, like those of us at All Seasons Comfort Systems Inc, to help you find the right system for your home, expertly install it, and keep it operating smoothly every time.

What can I do to improve my home’s indoor air quality?

Improving your home’s indoor air quality starts with four basic strategies:

  • Eliminate – poor indoor air quality leaves your home filled with air pollutants floating around your home, so to improve IAQ, the first step is to eliminate as many pollutants as possible. You can easily do this is by cleaning and vacuuming at least once a week, frequently washing linens and storing cleaning products safely.
  • Ventilate – proper insulation is great for keeping your home warm in the winter and cool in the summer, but it also makes it harder for airborne pollutants to escape. Products like our Healthy Climate® ventilation system help exchange stale air for fresh, filtered outside air.
  • Clean – good ventilation and regular cleaning are a start, but Healthy Climate® air filters, germicidal lights and PureAire™ purification systems take your IAQ to the next level by capturing microscopic particles, killing germs and removing particles and germs while destroying chemical vapors.
  • Monitor – programmable thermostats will help you monitor the humidity levels and temperature to help prevent particles and germs from piling up and keep your home comfortable.

How does an air conditioner work?

Many homeowners believe that air conditioners make it cooler in your house, but it actually removes the heat from your house, moving the hot air outside. That hot air goes across a cold indoor coil where refrigerant in the lines sends the heat to the coil in your outdoor unit, releasing it outside. This process continues until the indoor temperature reaches the temp that was set on your thermostat.

What is the minimum energy efficiency standard for air conditioners in my state?

Due to the amount of energy used by heating and cooling systems, the Department of Energy (DOE) raised the minimum efficiency levels for air conditioners, heat pumps and packaged units manufactured after January 1, 2015. These levels are determined based on region and carry varying requirements based on your location. All Seasons Comfort Systems Inc can help answer any questions you may have regarding these minimum requirements and let you know what choices are available when you’re in the market for a replacement system.

What size equipment do I need for my home?

There are a handful of ways to determine what size system is the best fit for your home, but the most reliable way to size a system is by having your local All Seasons Comfort Systems Inc technician come out and perform a load calculation. This calculation considers your home’s: square footage, insulation value, amount of insulation, and a handful of other factors.

What is two-stage cooling?

Two-stage cooling means that your cooling unit has two levels of operation. When summer is in its hottest weeks, the high setting starts up, and when it’s cooler or more mild, it operates on the low setting. Usually, the lower setting will take care of your cooling needs, but even when the high setting starts up, you may not realize it because it can generate such even temperatures for your comfort. This can also mean a quieter cooling system, greater efficiency and improved humidity control.

Why is my system freezing up?

When your cooling unit freezes up, there are a variety of reasons why it could be doing so. The most frequent reasons include: dirty filters, low refrigerant, a dirty evaporative coil and a faulty blower motor or relay. A dirty filter is something you can take care of as a homeowner, but the others need to be done by a professional like those at All Seasons Comfort Systems Inc. Contact them at 417-739-4606 with any other questions.

What is the best thermostat to use for my cooling system?

Picking the best thermostat for your cooling system comes with a lot to think about. That’s why it’s nice to have such a big variety of choices from All Seasons Comfort Systems Inc. Whether you’re looking for a programmable or non-programmable thermostat or want to join the smart home trend, there are a number of thermostats that you have to pick from. Some thermostats will depend on what type of heating and cooling system you have, but the team at All Seasons Comfort Systems Inc will be able to help determine what options fit your needs and your budget.

What is a heat pump?

Heat pumps can be a bit confusing due to their name, but they actually take care of both your heating and cooling needs all year. When it’s hot outside it operates like an air conditioner in that it removes heat from your home, but when it cools off, the process gets reversed and it collects heat from outside and brings it inside. Heat pumps are also very efficient, and could produce up to two or three times more heat than the energy it uses.

When replacing the outdoor unit, should the indoor unit also be replaced?

Of course we think you should also replace your indoor system, but this is why:

  • All outdoor cooling systems have a matching indoor unit that they are designed to work with to ensure efficient performance. When they aren’t paired with the other piece as a whole system, efficiency may be diminished.
  • As with many products, advancements have brought about newer, more efficient ways of doing things. Heating and cooling systems are no different. These improvements most importantly include greater heating and cooling efficiency, but also consist of improved air handling, filtering and noise pollution reduction to name a few.
  • Heating and cooling systems that are more than 10-15 years old typically need to be replaced. Not only do they consist of outdated technology, but they are also less efficient than today’s models. Getting a new indoor unit at the same time means you’ll have a matched system to provide you with improved comfort and efficiency for years to come.